12 |
w w w. e v o l v e - f i t n e s s . e u
GETTING STARTED
TURN POWER ON
Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON” position. The
screen shines with prompt sound.
SAFETY KEY AND CLIP
The safety key is designed to cut the main power to the treadmill if you fall. Therefore, the safety
key is designed to bring the treadmill to an immediate stop. At high speeds, it may be
uncomfortable and somewhat dangerous to come to a complete stop immediately. So, use the
safety key as emergency stop only. To bring the treadmill to a complete stop safely and comfortably,
use the red stop button.
Your treadmill will not start unless the safety key is properly inserted into the key holder in the
middle of the console. The other end of the safety key should be securely clipped to your clothing.
In case you fall, safety key will be pulled out of the console, which will stop the treadmill
immediately to minimize injury. For your safety, never use the treadmill without securing the safety
key to your clothing. Pull on the safety key clip to make sure it will not come off your clothing.
GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the handlebars while getting on
or off. While you are preparing to use the treadmill, do not stand on the running belt. Straddle the
running belt by placing your feet on both side rails of the treadmill deck.
Place your foot on the belt only after the belt has begun to move at a consistent slow speed.
During exercise, keep your body and head facing forward at all times. Never attempt to turn around
on the treadmill when the running belt is still moving. When you have finished exercising, stop the
treadmill by pressing the red stop button. Wait until the treadmill comes to a complete stop before
attempting to get off the treadmill.
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the belt when the speed
is no more than 3km/h.
