18 |
w w w. e v o l v e - f i t n e s s . e u
7.16
The electric control system is always under inspection. Treadmill will stop once something
abnormal happens. Window will show the error message and release a sound.
；
7.17
BODY FAT FUNCTION
：
When the treadmill is stopped, press the "PROGAM" key until you
see “FAT” program. Enter into body fat function, on the left side “DISTANCE” window
display object no., press “MODE” key to select. On the right side, “SPEED” window displays
parameters, press “
＋
”
、
“
－
”to set up parameters.
7.18
F1 means Sex, 1 means male, 2 means female. The default is Male
；
7.19
F2, means Age, the setting range is 1-99, and the default is 25.
7.20
F3 means Height, the range is 100-220 cm (39-87 inches), the default is 170 cm (67 inches)
7.21
F4 means Weight, the range is 20-150 kg (44-330 pounds), the default is 70 kg (154 pounds)
7.22
F5 means BMI. It shows you have selected all the settings. Put both hands on handlebars, wait
for 8 seconds, and the window will show the BMI.
Example shows typical BMI of Asian people:
a.
BMI under 18 is underweight;
b.
Between 18 and 24 is normal weight;
c.
Between 25 and 28 is overweight;
d.
And over 29 is obesity.
8. USER program:
Treadmill has three user modes: USER01, USER02, and USER03 that can be adjusted by the
user.
Press “PROG” key to cycle and select the program U01~U03. Press “MODE” to set the
parameters, user can set his own of speed and incline for all 16 segments. After setting the
parameters press “START” to start the treadmill. User program is saved automatically and can be
used next time.
９
.
HRC Operation Instruction (Optional)
9.1
HRC controller speed mode is using wireless heart rate. The heart rate control speed mode
uses wireless heart rate, and by setting the heart rate (target heart rate: THR), automatically
adjusts the speed of the function. Hand pulse sensors cannot be used for this feature.
9.2
HRC default has three groups, HRC1 limits the speed to 9 km/h, HRC2 limits speed to 11
km/h, HRC3 limits to 13 km/h (this machine only has HRC1 because of the configuration)
9.3 HRC setting method, sequence, parameter range, press the program key to display HRC, press the
mode to confirm and enter the next set of settings, press the speed adjustment key, set the last
parameter to start:
