17 |
w w w. e v o l v e - f i t n e s s . e u
7. Safety guidelines
：
7.1
Put the power cord into the electrical outlet with 1 0 A. Flip the switch to the “ON” position.
The screen shines with prompt sound
；
7 . 2
Put the safety key in the correct position and clip it to your clothes, then turn the power on, the
LCD window light is shining, and you hear a sound “bebe”, the treadmill enters in to the P0
Normal Mode
；
7.3
Press “PROG” key to cycle through and select the program
：
P0~P36
、
U0I
、
U02
、
U03
、
FAT
：
7.4
“P0” User program
，
Press “MODE” cycle select for this training mode
，
User can select the
speed and inclination. Speed default is 1.0km/h, inclination default is 0%.
7.5
Training mode1
：
Counting. Time, distance, calorie are counted. The select function is closed.
7.6
Training mode2
：
Time Countdown. After selection, time window flickers. Press “+””-“to
modify the value. The range is 5-99 minute. Default is 30:00 minutes
；
7.7
Training mode 3: Distance Countdown. After selection, Distance window flickers. Press
“+””-“to modify the value. The range is1.0-99.0 km. Default is 1.0KM.
；
7.8
Training mode 4: Calories Countdown. After selection, calories window flickers. Press “+”
“-“ to modify the value. The range is 20-9990 cal. Default is 50 cal
；
7.9
“P1-P36” Preset program
，
Only for Time Countdown mode. After selection, time window
flickers. Press “+””-“ to select. The range is 5-99 minute. Default is 30:00. Press “MODE” key
to return to Defaults.
；
7.10
Press “START” after setting up training mode. Screen display a 5 second countdown,
accompanied by five warning sounds. After the countdown, treadmill start gently; speeds up
slowly to the display value, then levels to the constant speed operation.
7.11
During running, press the “+ “, “–” or quick speed key to adjust the speed you want
；
7.12
For P1—P36, Speed is divided into 16 segments. Each segment has the same time. The speed
after selecting will keep its value in a current segment. You will hear a sound 3 times before
entering to the next segment. After finishing all 16 segments, the motor will stop with a long
prompt sound.
7.13
Press “START” key when running to pause the treadmill. Press “START” key again to continue
your workout. Workout data will continue counting.
；
7.14
Press “STOP” key when running, the treadmill will slow down to a stop. It will return to the
default state
；
7.15
In any state, pull-out the safety key. Window displays error message “E7” and a sound buzzer
can be heard. The treadmill stops.
；
