EvoJet B110neo, Руководство пользователя

Страница: 34 / 43

B110neo – B170neo – B220neo – Instructions 6.0
55:RC3-LOW
Adjusting the LOW-signal for the RC3-output.
Standard value: -100%
56:RC3-HIGH
Adjusting the HIGH-signal for the RC3-output.
Standard value: +100%
57:FAILS-TIME
Adjusting the hold time for the RC1 signal in the case of a remote control failure (failsafe).
If the RC1 signal is out the range between the values defined at 51:RC1-TRIM.OFF and 53:RC1-
100%, a remote control failure (failsafe) is detected. During the time specified here, the JETRONIC
will automatically set the throttle to the value defined at 58:FAILS-THROTTL.
If the failsafe state persists after this time has elapsed, the jet engine is switched off automatically.
Standard value: 5 seconds
58:FAILS-THROTTL
Adjusting the thrust level in the case of an RC1 signal failure (failsafe)
Standard value: 20 %
59:AUX-MODE
Selecting the AUXiliary function / connection to the JETRONIC - AUX
OFF = no function
AIRSPEED = airspeed sensor connected, 37:AIRSPEED-MAX active!
WARN-LED = Low rpm / overheating indicator with external LED
SMOKER-VALVE
= A smoker valve 5V/100mA can be connected.
5A:THROTTL-TYPE
Selecting the throttle transferfunction for the engine speed (throttlecurve).
NORM = The Throttle control works softer - better for smaller and lighter airplanes.
HARD = The Throttle works harder, e.g. quicker. Better for bigger and heavy airplanes.
34