EvoJet B110neo, Руководство пользователя, Страница: 18 / 43

B110neo – B170neo – B220neo – Instructions 6.0
TH:spin
→ Spin-up via the electric starter and fuel ignition.
See also 40:SPINUP/FIRE (page 23).
TH:heat
→ Heat-up phase of the kerosene igniter and the combustion chamber.
See also 44:HEAT-UP (page 23).
TH:acce
→ Acceleration of the turbine to normal operation.
See also 43:ACCE-RAMP (page 23).
TH:cal.
→ Calibration of the fuel pump and the fuel supply system.
TH:idle100%
Thrust available to the pilot. Ready for takeoff!
TH:-off
→ To turn off the engine, pull the throttle and the trim all the way back.
TH:cool
→ The engine enters a controlled cool-down phase to ensure a long life of the
high-performance bearings.
The error codes are explained under Firmware Setup 19:LAST-OFF on page 16/17.
Notice:
To learn-in a new fuel-system, let the jet engine run at least for 10 seconds at full speed
(max-rpm).
Attention:
Dont do exessive full-throttle ground runs in the airplane withour sufficient air supply !
18