EvoJet B110neo, Руководство пользователя

Страница: 33 / 43

B110neo – B170neo – B220neo – Instructions 6.0
53:RC1-100%
Teach-in the RC1 signal for the position "engine = 100 % / full thrust" (longest pulse). Activate the
teach mode with the SET key and move the throttle to the 100 % / full thrust position (trim and
throttle all the way forward). The new pulse length is shown on the display. To finish the
adjustment and store the new value, press the SET key again.
Standard value: 2.00 ms
54:RC2-MODE
Selecting the RC2 signal function
Standard value: OFF
OFF
= control only via RC1 (throttle and trim).
SMOKE-VALVE
= switching function for a smoker valve 5V/100mA connected to the AUXiliary port
OFF = -100%, ON = +100%.
For this set 59:AUX-MODE to
SMOKER-VALVE . The smoker function is enabled
when the turbine is running or when using the testfunction 65:SMOKER-RC2.
AIRSPEED = switching function for the airspeed limiter
OFF = -100%, ASL(AirSpeedLimiter) = +100%
see also 37:AIRSPEED-MAX and 59:AUX-MODE.
SMOKE-PUMP
= switching function for a smokepump connected to the RC3 terminal.
OFF = -100% =>
55:RC3-LOW / ON = +100% =>56:RC3-HIGH
At 55: the OFF and at 56: the full power is adjustable.
The smoker function is enabled when the turbine is running or when using the
testfunction 65:SMOKER-RC2.
JET-SAIL = switching function for a Servo connected to the RC3 terminal. This can be used for
a sailplane with enginebay or a jetmodel with extra air gills or similar.
OFF = -100% =>
55:RC3-LOW / ON = +100% =>56:RC3-HIGH
At 55: and 56: the servos end positions are adjustable.
33