EvoJet B110neo, Руководство пользователя

Страница: 17 / 43

B110neo – B170neo – B220neo – Instructions 6.0
Jetronic Display EDT(Engine Data Terminal)
TH:
= Throttle is a combined function display and error display for the engine operation.
Use the Up/Down keys to select different display values:
Ub11.8V
→ current battery-Voltage.
FP 2.1V
→ current fuel-pump-Voltage.
0km/h
→ current air-speed display in km/h (for telemetrie).
0.00rpm
→ current rotor-/propeller-speed (rpm).
Function display – example for a standard start-up procedure:
TH:lock → Remote control locked – to unlock it, pull the throttle and the trim
all the way back. See also 51:RC1-TRIM.OFF (page 25).
TH:stop
→ Remote control unlocked – engine off – to turn it on, push the trim up.
See also 52:RC1-IDLE (page 25).
TH:run- →
Engine on – for a further check, push the throttle forward.
See also 53:RC1-100% (page 25).
TH:rel-
→ Check complete – to start the turbine, pull the throttle back to the IDLE
position within 10 seconds.
The fuelpump confirms the starting procedure with a short burst.
TH:glow →
Preheating of the kerosene igniter, this takes about 5 to 15 seconds.
17