EVO Manufacturing EVO-3010, Инструкция по эксплуатации

Страница: 22 / 22

22
After Install:
o
Tighten all bolts securing purchased parts to specified locations.
o
After completing installation using provided instructions, go through all steps again to make sure
nothing was missed, not tightened or improperly assembled.
o
Some components may need to be purchased separately.
o
Check turn signals, headlights, fog lights (if applicable), taillights, blinkers and windshield wipers.
o
Adjust mirrors, speedometer and headlights if needed.
o
Make sure all gauges are fully operational.
o
Drive the vehicle slowly for a couple minutes, looking and listening for abnormal noises while
driving. After modification of a vehicle there will be differences in driving experiences and
capabilities, be mindful of that.
o
Inspect and Retorque all Bolts after 500 miles of competed installation and regularly thereafter.
o
Some modification may be required.
o
Test brakes and verify no leakage in lines before driving.
Recommended Torque:
Size
Grade 2 Grade 5 Grade 8 18-8 S/S
Coarse Fine Coarse Fine Coarse Fine Coarse Fine
#4* - - - - - - 5.2 -
#6* - - - - - - 9.6 -
#8* - - - - - - 19.8 -
#10* - - - - - - 22.8 31.7
1/4 4 4.7 6.3 7.3 9 10 6.3 7.8
5/16 8 9 13 14 18 20 11 11.8
3/8 15 17 23 26 33 37 20 22
7/16 24 27 37 41 52 58 31 33
1/2 37 41 57 64 80 90 43 45
9/16 53 59 82 91 115 129 57 63
5/8 73 83 112 128 159 180 93 104
3/4 125 138 200 223 282 315 128 124
7/8 129 144 322 355 454 501 194 193
1 † 188 210 483 541 682 764 287 289