NVR8004X
84
7.
To jump to a Preset Position:
a.
Click the
Preset
button.
b.
Click the desired Preset number.
c.
Click the
Go
button.
8.
Shortcut for Preset 1 ~ 9:
a.
Click digit 1 ~ 9 button without clicking any other buttons.
b.
The camera will seek that Preset Position.
9.
To delete a Preset Position (if supported by the camera):
a.
Click the
Preset
button.
b.
Click the desired Preset number.
c.
Click the
Delete
button.
10.
To operate the Auto Pan function, click the
Auto Pan
button.
11.
To operate the Pattern function, click the
Pattern
button. The Pattern is the “0” Tour in
EverFocus and Pelco PTZ cameras.
12.
To operate the Tour function:
a.
Click the
Tour
button.
b.
Click the desired Tour number.
c.
Click the
Go
button.
13.
To remove a pre-configured Tour (if supported by the camera):
a.
Click the
Tour
button.
b.
Click the desired Tour number.
c.
Click the
Delete
button.
Click
C
to clear the entered number in the Number Box.
Note:
Before start using the Auto Pan, Pattern and Tour functions, you have to configure the
related settings for the connected PTZ cameras. Please refer to
4.1.4.2 PTZ
or the User’s
Manual of your PTZ cameras.
Control PTZ Camera over EKB200 Keyboard:
When using an EKB200 keyboard, you need to click
the
Connect
button on the PTZ Control
Panel. Please note that you need to configure the PTZ control functions and define the
function for each control key on the keyboard before controlling the PTZ camera over the
EKB200 keyboard (see
4.1.4.2 PTZ
and
4.7.5 EKB200
). For information about the installation of
the EKB200 keyboard, please refer to your EKB200 keyboard User’s Manual.
