ETN2160/2260/2560
60
7.7
Access List
7.7.1
Access List Setting
Use this page to specify IP addresses that are allowed / denied to access this camera. By default, any
IP address can access the camera.
Note:
1. The user can only use either the
Allow
or
Deny
filter type because the allow and deny functions
cannot work simultaneously.
2. Switching the configured filter type will erase all the previously added filter list, so please
carefully decide which filter type you want to use before applying the setting
.
Current Access List is:
Check Enable to display and configure the following settings.
Filter Type:
Select
Allow
to allow the IP address configured below to access the camera. Select
Deny
to deny the IP addresses configured below from accessing the camera.
Access List Setting:
Select
Add address
to add allowed or denied addresses. Select
Delete address
to
delete the added allowed or denied addresses.
Rule:
Select a network rule and then fill in the IP information in the below boxes.
- Single:
Type a single IP address in the IP Address field below.
- Network:
Type the IP address and subnet mask in the field below.
- Range:
Type a range for the IP addresses.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous settings.
