ETN2160/2260/2560
24
Pan / Tilt Function
To operate the Pan / Tilt function, simply click the Direction Buttons.
Home Position
Click the Home button to return to the default Home Position (see the red tiny square on the Location Panel).
You can optionally configure the desired Home Position (see
7.2.3.2 Camera Control
).
Auto Pan
Click the
Auto Pan
button to start / stop the default Auto Pan function. You can manually set up the Auto Pan
range (see
7.2.3.2 Camera Control
). The button will turn grey when the function is enabled. Click the button
again to disable the function.
Patrol
You can combine the preconfigured preset points into one long sequence. Click the
Patrol
button to start /
stop the Patrol function. The button will turn grey when the function is enabled. Click the button again to
disable the function. Note that to enable the Patrol function, you have to set up the preset points first (see
5.5 Setting up the Preset Points
) and then configure the Patrol settings (see
7.2.3.3 Patrol List Setting
).
Auto Tracking
Click the Auto Tracking button to start / stop the Auto Tracking function. The button will turn grey when the
function is enabled. Click the button again to disable the function.
Digital Zoom
Click the
Digital Zoom
button and the Digital Zoom control window appears. Check
Enable digital zoom
to
enable the Digital Zoom function. Slide the zoom factors bar to adjust the zoom size (Navigation Box size).
You can then use your mouse to drag and move the Navigation Box around to have a close-up view within
the area.
Navigation Box
