ETN2160/2260/2560
22
5.5
Setting up the Preset Points
You can configure up to 20 preset points. The configured preset points will be displayed on the Location
Panel with green tiny squares.
1.
On the Live View window, click the
Go to
button to display the
Create new preset
panel.
2.
Select a desired location on the Live View. There are two ways:
a.
Using the Location Panel: Click on the Location Panel to select a desired location.
b.
Using the Live View PT Control: Move your mouse over the Live View window and then click to
force the camera to aim the clicked location as the center of the image. Repeat this action to
move the camera to the desired location.
3.
Click on the Create new preset column and then type a name for the selected location.
4.
Click the
+
button, the location (preset point) will be listed in the
Create new preset
panel. You can see
the preset point displayed on the Location Panel in green.
On the
Create new preset
panel, only 10 preset points can be listed per page. To change between page 1 and
page 2, click
.
