EverFocus EPN Series Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 114

EverFocus EPN Series Скачать руководство пользователя страница 98

EPN4220d/4220di

92

7.9.4

Maintenance

【

Maintenance Server

】

Reboot:

Click this button to reboot the unit without changing any of the settings. Use this function if

the unit is not behaving as expected.

Restore:

Click this button to restart and reset most of the current settings to their factory default

values. The only settings that will not be changed to default are:

•

IP settings

•

DDNS settings

Default:

The

Default

button should be used with caution. Pressing this button will return all of the

camera's settings, including the IP address, to the factory default values. The camera will then have
to be reconfigured.

【

Save/Load Configuration Server

】

Save:

To make a backup file of the machine’s current configurations, press

Save

to save all the

configurations to a config. file. This will enable the user to reload these configuration settings if the
settings are changed and there is unexpected behavior.

Load:

To load a previously saved configuration, press the

Browse

button to locate the saved config.

file (see above) and then click the

Load

button. The system’s settings will be restored to the saved

configuration.

【

Save/Load Video Configuration Server

】

Save:

To make a backup file of the machine’s video configurations, press

Save

to save the video

configurations to a config. file. This will enable the user to reload these configuration settings if the
settings are changed and there is unexpected behavior.

«
...
96
97
98
99
100
...
»

Содержание EPN Series



















































































































Отзывы:

Нет отзывов