EverFocus EPN Series Скачать руководство пользователя страница 49

Страница: 49 / 114

EPN4220d/4220di

【

Date/Time Format Used in Text

】

Click the dropdown menu to select

date/time format

from the

listed options. Click on the desired hour format. Click

Apply

to apply the changes or

Cancel

to cancel

the changes and return to the previous settings. To enable displaying the date and time information
on the Live View Window, you have to check the

Date/Time

box in the Text Settings field above.

【

Recording / Snapshot Export Settings

】

Enable Event Recording to PC:

Check this box to record the event recordings to the user’s PC.

Export Folder:

Select the Export folder for the action above by clicking on the browse

button,

and then select the desired folder.

File size:

The user can limit the size of each recorded file here (in minutes).

Once you click the

Record

button on the Live View window, the camera will start recording the live stream to your computer.
When a single recording file exceeds the time you set, the system will create a new file to save that
data to.

Overwrite:

Select “

” for overwriting recording/snapshot file when the disk storage capacity is full.

The user can set the storage capacity limitation in the in-sentence field in the gray box below the
Overwrite setting:

“If the remaining hard disk capacity is less than ____ MB (50~2000), system will

stop recording or start overwriting. “

Click

Apply

to apply the changes or

Cancel

to cancel the changes and return to the previous settings.

【

Language Settings

】

To add a new language not listed in the current Language list, click the

Browse

button to locate the new language file (.evb) on your computer and then click the

Upload

button.

Updated language files might be available on the manufacturer’s website. Contact your vendor if
required.

Click

Apply

to apply the changes or

Cancel

to cancel the changes and return to the previous settings.

Note:

Uploading a new language file will cause the system to reboot automatically. Please create a

new network connection to the IP camera when the reboot is complete.

Содержание EPN Series



















































































































Результаты поиска

Содержание EPN Series

Отзывы:

EverFocus EPN Series, Руководство пользователя, Страница: 49 / 114

Результаты поиска

Содержание EPN Series

Отзывы: