EPN4220d/4220di
81
7.7.2
IP Address Filter
Use this page to specify IP addresses that are not allowed to access this camera. By default, any IP
address can access the camera. Up to 10 items can be configured.
Note:
The Allowed List addresses only become relevant when the Denied List contains a network or
range, and the supervisor wants to allow one or more IP addresses within that excluded range or
network. In such a scenario, the user would enter the excluded range or network in the Denied List,
and enter the exceptions in the Allowed List.
To set up the IP Address Filter:
1.
Select Denied List. Click the Add button, the following dialog box appears.
2.
Select an IP type from the IP Type drop-down list.
3.
Select a network rule from the Rule drop-down list, type the IP address and click
OK
.
Single:
Type a single IP address in the IP Address field below.
Network:
Type the IP address and subnet mask in the field below.
Range:
Type a range for the IP addresses.
4.
If you have set up an IP range in
Step 3
, you can optionally set up the Allowed List to allow one
or more IP addresses within the setup IP range to access the IP camera.
5.
Click
Apply
.
Содержание EPN Series
Страница 65: ...EPN4220d 4220di 59 7 4 3 Advanced ...
