Eventide H9, Руководство пользователя

Страница: 42 / 52

H9 User Guide System Mode
39
[RCV.MAP] – Create a MIDI Program Change Receive Map
MIDI maps are an efficient way to instantly recall any of the H9’s Presets using your favorite
MIDI controller (pedal board, sequencer, etc.). Press the HOTKNOB button to select and
create a MIDI Program Change Receive Map. This function sets the corresponding Preset that
is recalled when a MIDI Program Change message is received. (Referred to as Prg No. from
here on.)
Note that if a Preset is saved “Bypassed,” when it is loaded by using a MIDI Program Change
command the Preset will load but the pedal will be Bypassed.
The Left Field displays the Prg No. (0-127) and Right Field displays either the Preset Number
(P01-P99) or one of various Bypass options described below, or OFF. The two fields are
delimited by a decimal point [127.P99]
There are two ways to select the MIDI Prg No: manually or using Learn Mode. To select
manually, with the Left Footswitch LED flashing, turn the Knob to select the desired Prg No.
from 0 to 127.
To use Learn Mode, press the Left Footswitch again. In LEARN mode, the Prg. No. will be
automatically set when a MIDI Program Change message is received. Pressing the Left
Footswitch exits LEARN mode.
Press the Right Footswitch to select the Preset field (indicated by the flashing Right Footswitch
LED) and turn the Knob to select the Preset.
To map another Prg No. to another Preset, press the Left Footswitch again to select the
desired Prg No., then the Right Footswitch to map it to the desired Preset.
Default map: Prg No. (1-99) map to the 99 Presets (P01-P99).
As well as using MIDI program change to load a preset, this message can also be
programmed to directly control the unit’s BYPASS setting. With the Right Footswitch LED
flashing, turn the Knob counter-clockwise to select:
[OFF] Unassigned
[BYP] BYPass the unit
[ACT] Make the unit Active, i.e., not bypassed.
[TOG] Toggle between bypass and active.
Press the PRESETS button once to back-up one level to MIDI menu.
Press the PRESETS button twice to go to top level System menu.
[XMT.MAP] – Create a MIDI Program Change Transmit Map
When the Left Footswitch loads a Preset, a MIDI Program Change message can be
transmitted from the MIDI Out jack or USB to control an external device - e.g., another
Eventide Stompbox, an Eventide Eclipse, an Eventide H8000FW, etc.
To Create a MIDI Program Change transmit map, press the HOTKNOB button to access the
MIDI transmit map for editing.
The Left field displays the Preset number (P1 to P99). The right field displays either OFF or the
Prg No. (0-127). Default map: Prg No. 0-99 map to Presets P1 to P99.
Press the Left Footswitch to select Preset field (indicated by the flashing Left Footswitch LED),
turn the Encoder to select the Preset.