H9 User Guide
Bypass
16
Note: With the H9’s power turned off, the relays automatically bypass the unit. This means
that if power should accidentally go down while you’re playing, your guitar signal will not
disappear. Of course, if power is down, you may have bigger problems.
Killdry – Send/Return Loop
If you’ve connected the H9 using an effect send/return loop (either your amp’s or a mixer’s),
the H9’s Killdry feature can be enabled.
When Killdry is enabled, the H9 does not send any dry signal to the outputs; only the Effect.
Note that when Killdry is enabled, Bypassing will mute the Effect rather than Bypass it when
DSP Bypass is selected.
Killdry’s factory default is disabled. It can be enabled in the [BYPASS] menu of the System
Mode. Here’s how:
1)
Press and hold the HOTKNOB button and Right Footswitch simultaneously for a
few seconds to enter System Mode.
2)
Turn the Knob until [BYPASS] is displayed.
3)
Momentarily press the HOTKNOB button.
4)
Turn the Knob until [KILDRY] is displayed.
5)
Momentarily press the HOTKNOB button.
6)
Turn the Knob to select either [YES] or [NO].
7)
Press and hold the HOTKNOB button and Right Footswitch simultaneously for a
few seconds to exit System Mode.
Note that Killdry operates slightly differently in Pre/Post mode.
Содержание H9
Страница 1: ...H9 Harmonizer User Guide ...
