Eventide H9, Руководство пользователя

Страница: 29 / 52

H9 User Guide Backing Up Presets & System Settings
26
Auxiliary Switches
The rear panel Expression Pedal jack (labeled EXP) can be set to support three independent
momentary switches using Tip, Ring and Tip+Ring. In System Mode, you can choose to use
the EXP jack for either your Expression Pedal or Aux Switches. Here’s how to select the Aux
Switch:
1) Press and hold the HOTKNOB button and Right Footswitch simultaneously for a few
seconds to enter System Mode.
2) Turn the Knob until [UTILS] is displayed.
3) Momentarily press the HOTKNOB button.
4) Turn the Knob until [EXPTIP] is displayed.
5) Momentarily press the HOTKNOB button.
6) Turn the Knob to select [SWITCH]. Factory default choice is [PEDAL]
7) Press and hold the HOTKNOB button and Right Footswitch simultaneously for a few
seconds to exit System Mode.
The Aux Switches do not disable the H9’s Footswitches – the local Footswitches are always
active. Aux Switches can be programmed to perform a number of functions and they make it
easy to connect a dedicated Tap Tempo switch or Performance Switch (Infinite Repeat, Flex,
Fast/Slow, Learn) or Preset/Decrement Switch, etc.
Some users may want to have all switch functions immediately available (the H9’s two
footswitches and three from the AUX Switch). A suggested set-up would be using the H9’s
Active and Tap footswitches and the AUX Switch assigned as preset increment, preset
decrement and performance switch. A set of three Aux Switches can be connected and
assigned accordingly.
Aux Switches can also be assigned to parameter values allowing you to switch between two
parameter values. For example, you could assign an Aux Switch to toggle between Decay
times of 1 and 5 sec. To program the Aux Switches see System Mode.
Notes:
1) You must use a stereo phone ¼” plug to connect Aux Switches.
2) Latching Toggle switches are not supported. Only momentary switches will work properly.
3) Simultaneously pressing the switch assigned to the Tip and the switch assigned to the Ring
will trigger the function assigned to the Tip+Ring.
Refer to www.eventide.com for information on recommended Aux Switches.