H9 User Guide
Presets, Algorithms, Parameters
18
Additional details on adjusting parameters can be found in the “Algorithms and their
Parameters” section of this User Guide.
Edited Preset Indication
Whenever a Preset’s parameter values are changed, the far right decimal point of the six
character display is lit to indicate that the parameter values are different from the Preset’s
values. Parameters can be changed by:
a)
changing a parameter value,
b)
changing an X, Y, or Z button’s top-level parameter,
c)
moving the Expression Pedal or HOTKNOB,
d)
tapping a new tempo,
e)
receiving a MIDI command.
Note: Edited Presets are lost if they are not saved before loading another Preset.
Saving Presets
To save a Preset:
1)
Press and hold the PRESETS button for a few seconds, the current Preset Number
and 4 characters of the Preset Name are displayed. Release the PRESETS button.
The Preset number flashes and the “Edit” LED is lit (far right decimal point).
2)
Turn the Knob to select the desired Preset Number for editing. When saving, all
Preset numbers are available even if you’ve limited the number of active Presets.
3)
Press the Right Footswitch and the first character of the Preset name will flash.
Turning the Knob will change this character. Preset names can have up to 16
characters. The available character set is '0-9', 'A-Z'.
4)
Use the Left and Right Footswitches to traverse the display, selecting the character
to be edited by the Knob. (The active character for editing is always flashing.)
Repeated pressing of the Right or Left Footswitch will traverse through the name,
one character at a time, flashing the selected character. Press and hold Left
Footswitch to DELETE the currently flashing character.
5)
Press and hold the Right Footswitch to INSERT a character before the currently
flashing character.
6)
To save the Preset, press and hold the PRESETS button a second time. The Display
will show [SAVED].
7)
After a short time, the Save mode is exited.
8)
To exit Save without saving, press and release the PRESETS button again without
holding it or press the Knob. Upon exiting Save mode without saving, [NO SAV] is
displayed and, after a few seconds of inactivity, the display reverts to showing the
currently loaded Preset.”
Note: You must PRESS and HOLD the PRESETS button to save. If you press and release quickly,
the new Preset will not be saved. This is intentional. When you save a new Preset, you
overwrite the old Preset. The H9 is designed to assure that saving is a deliberate act. The
Preset number corresponding to the currently running Preset will flash as a warning that
saving in this location will overwrite the currently loaded Preset.
Note: The cursor will “wrap around the display,” i.e. Pressing the Left Footswitch will move
to the left by one character at a time until it gets to the first character, then it will jump to the
Preset Number field. Pressing the Left Footswitch again will jump to the last character.
Note: A ‘phantom’ character is always present at the end of the name to allow characters to
be added past the end. This cannot be deleted but is removed on exit.
Содержание H9
Страница 1: ...H9 Harmonizer User Guide ...
