Studio Pro 24
Installation and Operating Instructions
North American Model
Jan 2019
Page
4
of
17
Assembly & Installation
Tools needed for installation:
Phillips Screwdriver
7/16” Wrench
1/4” Nutdriver (included)
Remove Shipping Container and Top Styrofoam
Cut the plastic shipping bands and remove the shipping container lid.
Remove the Styrofoam sheets. You will note that 4 pieces of angled metal
(used for the stand) are held within the Styrofoam. Set the Styrofoam aside
and stack - do not dispose of just yet.
Stand Assembly and Placement
Locate the “stand box” and remove from the shipping container. This box contains the various hardware items needed to complete installation.
Remove the contents from stand box and locate the 4 stand legs and stand
hardware (16 nuts and bolts).
Locate the 2 long metal piece and 2 short metal pieces removed from the
container previously. Along with the 4 angled top stand legs these will form
the kiln stand.
Place one long and one short frame metal angle, along with one stand leg
to form a corner as shown. Secure corner with stand hardware nuts and
bolts.
