Studio Pro 24
Installation and Operating Instructions
North American Model
Jan 2019
Page
9
of
17
Have one person rotate the chamber up from the front chamber handle.
(The chamber should be held there until all 2 lift assist springs are
attached)
.
Insert the spring end as shown.
Locate the hole in the back left chamber hinge.
Insert the end of one spring, from the inside of the hole as shown.
Locate the 2 holes in the right left floor base. Of these 2 holes, you will be
placing the other end of the spring into the inner most as indicated.
Insert the spring end as shown.
Properly placed lift assist springs, back right. When installed the right side
assist spring will look as shown.
