Studio Pro 24
Installation and Operating Instructions
North American Model
Jan 2019
Page
6
of
17
Move and Place the Kiln Floor on the Kiln Stand
Move the floor to the kiln stand and place it into the stand. The kiln floor chamber weighs approximately 55 pounds. Two people are needed for
moving. Use personnel capable of safely lifting and moving this amount of weight.
Move the Kiln Chamber to Kiln Floor
You must now move the kiln chamber and place it on the kiln floor. The kiln chamber weighs approximately 125 pounds. Two people are needed
for moving. Use personnel capable of safely lifting and moving this amount of weight.
Important Notes and Cautions for kiln chamber moving:
When moving the chamber it’s possible to rotate the chamber to move through narrow doors and hallways. When rotating you must
rotate in such a way as to place the rear lid hinges at the top. This prevents the lid from opening as the chamber is rotated.
If chamber rotation is necessary please note that as the chamber is rotated it becomes heavier on the lid side. When rotating, rotate
slowly and be ready to feel and react to the heavier lid side. Failure to keep this effect in mind may cause the chamber to rotate
unexpectedly and control may be lost. Damage to the kiln, other property or injury may result. Go slowly and be mindful and ready.
Grasp the kiln chamber as shown: hands towards the rear of kiln should be facing up and hands towards the front of kiln should face down. This hand
orientation will make rotating and controlling the kiln chamber easier if the chamber needs to be rotated to navigate narrow doors or hallways.
