Evektor SportStar MAX, Руководство по эксплуатации для пилотов

Страница: 129 / 134

PILOT’S OPERATING HANDBOOK
Section 8
Airplane Handling, Servic.
and Maintenance
2015-07-20
8-9
Doc. No. POH-20101308
8.5.4.2 Coolant Filling Procedure
1. Remove the upper engine cowling.
2. Fill appropriate amount of coolant into the reservoir located in the engine
compartment.
3. Install the upper engine cowling.
8.5.5 Brake Fluid Refilling
8.5.5.1 Recommended Types
Refer to the Airplane Maintenance Manual for SportStar MAX airplane for
recommended brake fluid types.
8.5.5.2 Brake Fluid Refilling Procedure
1. Remove the upper engine cowling.
2. Fill the brake fluid into reservoir located in the engine compartment on the
firewall. A brake fluid level must be approx. 25 mm in the reservoir.
3. Step repeatedly on the pedal during refilling.
4. Bleed the system after refilling.
5. Install the upper engine cowling.
8.6 Cleaning and Care
Always use appropriate cleaning agents when cleaning airplane surface.
Residuum of oil and fat can be removed from the airplane surface (excluding the
canopy) by suitable detergents, possibly by petrol.
The canopy only to be cleaned by washing with ample stream of tepid water with
addition of appropriate detergents. Use soft rag, sponge or wash leather. Use
suitable polishing agent after wiping rests of water.
CAUTION
NEVER DRY-CLEAN THE CANOPY AND NEVER
USE PETROL OR CHEMICAL SOLVENTS!
Coating, upholstery and carpets in the cockpit can be removed from the cockpit,
brushed and, if need be, cleaned with warm water with addition of appropriate
detergent. Dry up upholstery after doing this.