3.10. Oscilloscope Panel
On the right side of main window we can tick which of ECU signals we would like to see on
oscilloscope run. One the bottom left side of oscilloscope window we can find buttons to: change
the units displayed on the left vertical axis (
C, kPa, V, RPM, ms
).
On the bottom part of oscilloscope bookmark there are following buttons available:
•
“
Clear” -
clears all oscilloscope run registered.
•
“Record” -
starts recording and displaying signal values.
•
“Stop” -
stops recording and displaying the signals. We can rewind and check recorded
signals anytime.
•
“Load file” -
loads the oscilloscope run from file for preview.
•
“Save file” -
save the oscilloscope run into a file.
•
“Download” -
can load and watch the system driving data registered by datalogger (feature
available only in OBD CAN SAS).
•
“New oscillograph”
-each use of this button opens new separate window in order to display
selected signal.
34/42
