In
“
Service”
bookmark we can find following information about ECU: working time, gas working
time, service time, firmware version, serial number, date of production, ID number, last settings
modification date and time of last 5 service inspections made. We can also save in the ECU memory
the size of nozzle diameter installed.
“Service time” -
here we can set value of time left for the next service inspection. It can be set in
amount of kilometers left to make before the service inspection will be signalized. We assume that 1
hour of system work is equal to driving 50 km.
Service time is being signalized only when “
Total working time [hh:mm]”
will reach the value set
in “
Service time [hh:mm]”
. When it will exceed that value then after every start of the car in “
Auto
mode”
the buzzer will sound for a short period,yellow diode will blink few times and car will
automatically go back to “
Petrol mode”
. In such case we need to press button to go back to “
Auto
mode”
every
time when we want to drive on gas unless we will disable or set another Service
inspection.
3.15. Language
Here we can change the software language to different one. The software starts always in the same
40/42
