3.6. Calibration Panel
Map In
Calibration
bookmark is showing dependency of petrol injectors opening time on petrol
(red points) and petrol injectors opening time on gas (blue points) [ms] related to value of manifold
absolute pressure (vacuum) in the engine inlet manifold [kPa]. On the right bottom side of map
workspace there is indication of petrol (red colour) and gas map (blue colour) buffers [%].
Colour marker on the intersection of horizontal and vertical dashed lines shows the actual values of
vacuum and petrol injectors opening time.
Left axis is reserved for Multiplier line values (blue horizontal line) which is being used for
adjustment of gas injection opening time for all gas injectors.
The point of multiplier can be marked by clicking left mouse button and moved up or down by
holding this button. Multiplier points can be also modified by keyboard shortcuts:
•
←
-left arrow -changes active point to previous one by 1 ms
•
→
-right arrow -changes active point to next one by 1 ms
•
↓
-bottom arrow -decreases the multiplier for particular injection opening time. In example
changing the multiplier value from 1,0 to 0,8 will cause shortening of gas injection opening
time by 20%.
•
↑
-upper arrow -increases the multiplier for particular injection opening time. In example
changing the multiplier value from 1,0 to 1,2 will cause elongation of gas injection opening
time by 20%.
20/42