3.13. Conditions bookmark.
Conditions bookmark is showing which system parameter values might be temporarily preventing
the car from running on gas. Following conditions can be displayed in the software:
•
“Gas temperature too low”
– Gas temp. [C]
value
is lower than
Min. gas temp [C]
threshold value.
•
“Reducer temperature too low”
-Reducer temp [C]
value
is lower than
Min. reducer temp
[C].
threshold value.
•
“RPM level below min. changeover RPM”
-
actual RPM value is lower than
Min.
changeover RPM
threshold value. (before first changeover to gas from engine start).
•
“RPM level below minimum”
-
actual RPM value is lower than
Min. gas RPM
threshold
value.
•
“RPM level above maximum”
-
actual RPM value is higher than
Max. gas RPM
threshold
value.
•
“Petrol injection times too long”
-
the petrol injection opening times are higher than the
value in
“Max. load value [ms]”
threshold value.
•
“Gas pressure below minimum”
-
actual
Gas pressure [kPa]
value is lower than
Minimum
gas pressure [kPa]
threshold value.
•
“Gas pressure above maximum cut-off”
-
actual
Gas pressure [kPa]
value is higher than
Cut off pressure [kPa]
threshold value.
3.14. Service
39/42
