E-Drive sur CF80 en Anglais
UCF-000R001-GB
F.M:08/14
p: 37/41
Risks identification
Scale of risks for a using in conformity with
our recommendations
Electrical Risks
Burning Risks
Wound Risks with working parts
Risks linked to the Cleaning
Various Risks
Risks associated with cooking food
Risks linked with the gas
Risks linked with flour dust
BEFORE ANY WORK ON ELECTRICAL PARTS, CUT OFF THE SUPPLY TO THE APPLIANCE AT
THE EXTERNAL DISCONNECTING SWITCH.
BEWARE OF CAPACITOR VOLTAGE.
CAUTION: It is imperative to cut the oven electricity supply before changing the bulbs.
TO DISCONNECT THE APPLIANCE FROM THE ELECTRIC PLUG, NEVER PULL THE WIRE.
DO NOT TOUCH THE APPLIANCE
•
WITH A WET PART OF THE BODY.
•
IF YOU ARE BAREFOOT.
All work on the equipment must be done by a qualified and certificated staff.
For cases of untimely start-up of the safety systems, it is essential to contact your dealer
From direct contact during and after using : walls inside and outside, door glass, trays, frames,
light bulbs, heating elements, etc...
CAUTION : the external parts accessible can be very hot (external glass of the door, etc...). Use
always the handle to open the door.
With steam when opening the door. NEVER open the door during a steam injection.
SUMMARY OF RISKS LINKED WITH IMPROPER USE
Electrical Risks
Burning Risks
CAUTION
HOT
Wound Risks with working parts
Protruding metal parts may cause cuts
In order to avoid the accidents, it is imperative to wear protective gloves.
