E-Drive sur CF80 en Anglais
UCF-000R001-GB
F.M:08/14
p: 23/41
Automatic mode
The «Energy saving» mode, is automatically driven from the regulator. This function started when the timer has not been used from a defined duration.
The parameters of the «Energy saving» function, have to be adjusted in the user menu as described in the programming manual :
Delay /energy
saving switch
: Setting of regulator unused time before engaging the «Energy saving» function.
This delay can be adjusted from 0,1 to 9,5 (so, from 10 mn to 9h 50 mn with an increment of 10 mn).
Energy saving
set T°
: Adjustment of set temperature.
Temperature setting at «000», corresponds to the configuration : oven stop.
the setting between 50°C and 150°C corresponds to the soaking at low temperature.
When those both settings are completed (time and temperature), the «Energy saving» function will start automatically depending of the memorized delay.
When the «Energy saving» function starts, a sound of 5 beeps-beeps is emitted and the display shows :
When the temperature is set between 50°C and 150°C, the oven still works and the regulator maintains the requested temperature.
For example, if the time is adjusted to 1h30 and the temperature to 80°C, the control board will switch automatically in «Energy saving» mode if the TIMER IS UNUSED for 1h30,
and then it will adjust the oven internal temperature until it is <80°C.
It results that the regulator automatically engages and stops heating alternately to maintain a real internal temperature around 80°C .
From that time, the «Energy saving» function will start automatically depending of the
memorized delay.
To stop the «Energy saving» mode, press the key
.
If you do not need this function and that the major part of your bakings is done without using
the timer, call the technical department to deactivate the «Energy saving», function, since the
oven will stop if the timer is unused for 9h50mn .
