EUROCOM 5600D Monte Carlo, Руководство пользователя

Страница: 158 / 181

Troubleshooting
Power 7 - 7
7
Power
Problem Possible Cause - Solution
You turned on the power
but it doesn’t work.
(The battery status LED
, doesn’t light up.)
The battery is missing or incorrectly installed. Check the battery bay, make sure the
battery is present and seated properly (the design of the battery only allows it to go in one
way). Make sure there’s nothing interfering with the battery contacts.
The battery status LED
, is blinking yellow.
Low battery. Plug in the AC power source. If the computer doesn’t start up immediately,
turn it off then on again.
You are losing battery
power too quickly. The system is using too much power. If your OS has a Power Management/Power Options
scheme (see “Enabling Power Management/Options” on page 3 - 16 ) check its
settings. You may also be using a PC Card device which is drawing a lot of power.
The notebook feels too
hot. Make sure the notebook is properly ventilated and the fan port is not blocked. If this
doesn’t cool it down, put the system into
Hibernate mode or turn it off for an hour. Make
sure the vents aren’t blocked and the computer isn’t sitting on a thermal surface (see
“Overheating” on page 1 - 19 ). Make sure you’re using the correct adapter.
The battery pack will not
charge. The battery pack is exposed to an excessively hot or cold environment. Place the battery
in a suitable environment and after it returns to normal temperature try again. The battery
may be bad and may need to be replaced, contact your service center for more details.
The battery pack will not
charge and the charge
indicator light is off. The battery is already fully charged and the indicator light is broken.