EUROCOM 5600D Monte Carlo, Руководство пользователя

Страница: 145 / 181

Upgrading The Computer
6 - 8 Upgrading the Device in Bay Two
6
Upgrading the Device in Bay Two
If you need to upgrade or replace the device in Bay Two then follow this pro-
cedure, however take note of the warranty warning on the right.
1. Turn the computer OFF .
2. Place the computer on a clean, stable surface and turn it over.
3. Remove screw ( Figure 6 - 5 ).
4. Apply gentle, but firm, pressure at point ( Figure 6 - 5 ) and slide the
device out of the computer.
5. Just reverse the removal procedure to install the new device.
Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
Figure 6 - 5
Bay Two Device
Removal
1
1
2
2