www.euroboor.com
26
4.2 Restart mid-cut
If the machine is stopped during cutting, release the trigger and remove the blade from the
workpiece.
When in fully raised position, start the machine again and slowly lower the blade
on the workpiece. The work can now be resumed.
Do not force the machine, this will increase
wear on the blade and machine.
4.3 Carrying the machine
Note:
Only carry the machine with arm folded down
(Locked). For (un)locking the arm in the lowered
position, follow the steps below.
Note:
When the blade is carried separately from the
machine, make sure the blade is in its box/holder to
prevent injuries from sharp edges.
Lock the arm in lowered position.
1.
Lower the machine’s arm, and keep it in the fully lowered position.
2.
While in lowered position, press the lock pin. The lock pin will lock the arm in lowered
position.
3.
Now the machine is ready to be carried. Carry the machine using the handle on top.
Unlock the arm from its lowered position
1.
Only unlock the arm from the lowered position after the machine is standing stable
on its designated position.
2.
Unlock the arm by pulling out the lock pin from the machine.
3.
Firmly raise the machine’s arm. The arm is now in working position.
