www.euroboor.com
24
3.7 Adjusting cutting depth
The maximum depth of cutting can be adjusted b
y
turning the
depth adjustment bolt clockwise or
counter clockwise.
When depth is set to the right
value, this bolt prevents the blade to touch the
surface under the base.
3.7.1 Increase depth of cut
To increase the depth of cut, loosen the depth adjustment bolt (
by turning it counter
clockwise
), then rotate the nut in clockwise direction until it is
fully tightened.
3.7.2 Reduce depth of cut
To reduce the depth of cut, rotate the nut in counter clockwise direction firstly, then tighten
the
depth adjustment bolt
(by turning it clockwise) until it is fully tightened.
