www.euroboor.com
20
3.
When the spindle bolt is loosened: remove the small flange and the front-flange from
the driveshaft.
Note:
Keep the back-flange in place
4.
Raise the retractable blade cover and take out the current
blade.
WARNING:
Be careful for sharp edges.
5.
With the retractable blade cover still held in raised position, the new sawing blade can
be placed onto the spindle.
Note:
Check the blade for cracks or other damage before operation. Do not use blade
when it is damaged or deformed. Also check if the blade can run freely and without
vibrating.
6.
Lower the retractable blade cover and put the front-flange and small flange back into
place.
7.
Tighten the spindle bolt using the M10 hexagon key. Make sure the spindle is locked
using the spindle lock while tightening the spindle bolt.
8.
Put the spindle cover back in place and tighten the bolts using the M6 hexagon key.
