www.euroboor.com
37
9.2 Intertek proof of certification
Report No.:
SH12110495-001
Certified product:
Cutting off grinder
Model:
EDC.355
Fulfilled standard(s)
Stationary and Fixed Electric Tools UL987: Seventh Ed., Rev. June 4, 2010;
Bench Tools CAN/CSA-C22.2 No.71.2-08 August 1, 2010
The standard(s) listed here reflect the status at the time of release of this certificate
.
Date of issue:
15-1-2013
Certificate type:
Intertek authorization mark
This authorizes the application of the Certification Mark(s) shown below to the
models described in the Product(s) covered section when made in accordance with
the conditions set forth in the Certification Agreement and Listing report. This
authorization also applies to multiple listee model(s) identified on the correlation
page of the Listing report.
