www.euroboor.com
8
1.2 Specific safety information
WARNING:
This tool is intended to function as Dry Cut-Off Metal Saw. Read all safety
warnings, instructions, illustrations and specifications provided with this tool. Failure
to follow all instructions listed below may result in electrical shock, fire and serious
injury.
Safety instructions
1.
Fully assemble your metal cutting saw before operation.
2.
Secure your workpiece properly. Work should be clamped to avoid possible movement
and pinching as the cut nears completion.
3.
Please do the following safety checks before you start using the machine.
a.
Always check if all bolts, screws and clamps are fully tightened. Tighten loose
bolts before use. If bolts, screws or clamps are missing, please refer to your
EUROBOOR dealer and have these replaced.
b.
Always check if the blade can run freely before you start working with the
machine. Have the Dry Cut-Off Metal Saw serviced by qualified repair personnel
at your EUROBOOR dealer, if the blade cannot run freely or vibrates heavily.
c.
Check the blade for cracks or other damage before operation. Do not use blade
when it is damaged or deformed.
d.
Check if your workpiece is properly secured, using the machine’s clamp.
e.
Check if the blade of the machine is not contacting the workpiece before the
machine is turned on.
4.
Turn the machine on, but allow the motor to come up to full speed before you start
cutting.
5.
Lower the blade onto the material firmly.
6.
Wait for the blade to come to a full stop before making adjustments to the machine or
removing / securing the workpiece.
7.
Always shut off and unplug machine before servicing or adjusting the machine.
8.
Save the instructions manual and warning labels at all times.
