www.euroboor.com
9
Safety warnings
1.
Do not
operate your metal cutting saw until it is completely assembled and installed
according to the instruction.
2.
Do not
operate your metal cutting saw when bolts, screws and clamps are missing or
not fully tightened.
3.
Do not
operate the machine if you are not familiar with the operation of a metal cutting
saw. Please obtain advice from a qualified person
.
4.
Do not
use the machine in area’s with flammable liquids or gasses.
5.
Do not
use the machine in damp area’s or when it is exposed to rain.
6.
Do not
use the machine if the blade cannot run freely or vibrates heavily.
7.
Do not
reach behind or over the cutting tool when it is connected to the power source.
8.
Do not
reach your hands in or near the path of the saw blade.
9.
Do not
cut any objects that are not clamped, using the clamp of the dry cutting
machine.
10.
Do not
make any adjustments to the machine, removing or securing the workpiece,
when the blade has not come to a full stop.
11.
Do not
use a sawing blade with a larger outer diameter than the machines maximum
of 355 mm (14").
12.
Do not
remove any guards from the machine, as they contribute to the safety level of
the machine.
13.
Do not
allow the blade to chatter and jump as this may cause increased wear on the
blade, resulting in poor cutting and possible broken blade teeth.
