14
13
1
2
3
4
Log on the menu, press
or
, choose “Accessories”, press
.
Press
or
, choose “RFID Tag”, press
.
Press
or
, choose “Add”, press
.
LCD display will show “Please connect”, put the RFID tag close to the RFID
reader on the control panel. When a beep is heard, LCD display will show
“RFID (01-50)”, connection succeeded.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
Delete
3
Add/Delete/Edit RFID Tags
Add
Note!
If three beeps is heard when coding , the accessory is coded already.
Delete
3
Edit
3
Add/Delete/Edit Wireless Sensors
1
2
3
4
Log on the menu, press
or
, choose “Accessories”, press
.
Press
or
, choose “Wireless Sensors”, press
.
Press
or
, choose “Add”, press
.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
Add
If user wants to delete the added remote controls or RFID wireless keypads,
please choose “Delete” in the step
as above and press
. Then
choose to delete all or specific remote controls or wireless keypads, press
again.
[Enter]
[Enter]
Note!
When adding wireless keypad to control panel, please enter access code and
then press "arm" or "disarm" button on the wireless keypad. When a "beep' is
heard, the keypad is successfully connected to the panel.
If user wants to rename the added RFID cards or tags, please choose “Edit
Name” in the step as above and press
, then input the name.
[Enter]
If user wants to delete the added RFID cards or tags, please choose “Delete”
in the step as above and press
. Then choose to delete all or specific
RFID cards or tags, press
again.
[Enter]
[Enter]
LCD display will show “Please connect”, trigger the detector once to make
it send wireless signal to the control panel. When a beep is heard, LCD
display will show “Sensor (01-50)”, connection succeeded.
1
2
3
4
5
6
Delete
3
Edit
Type of Sensors
Names of Sensors
5
1
2
3
Test Mode
Test if the sensors are connected successfully to the control panel.
Log on the menu, press
or
, choose “Accessories”, press
.
[ ] [ ]
[Enter]
If user wants to rename the sensors, please choose “Edit Sensor Name” in the
step and press
. Then input the sensor name.
[Enter]
If user wants to delete the added sensors, please choose “Delete” in the
step as above and press
. Then choose to delete all or specific
wireless sensors, press
again.
[Enter]
[Enter]
Log on the menu, press
or
,
choose “Accessories”, press
.
Press
or
, choose “Wireless Sensors”, press
.
P r e s s
o r
, c h o o s e “ E d i t ”, p r e s s
.
Press
or
, choose “Sensor 01-50”, press
.
Press
or
, choose “Edit Sensor Type”, press
.
Press
or
, choose one type of “Normal Sensor/ 24 Hour Sensor/
Delay Sensor/ Home Sensor”, press
.
[ ] [ ]
[Enter]
[
]
[ ]
[Enter]
[
]
[
]
[ E n t e r ]
[
]
[
]
[Enter]
[ ]
[ ]
[Enter]
[ ] [ ]
[Enter]
Normal Sensor:
24 Hour Sensor:
Delay Sensor:
Home Sensor:
In armed mode, when normal sensors are triggered, alarm
system will alert. In disarmed mode, when normal sensors are triggered,
alarm system will not alert.
Under any circumstances, when 24 Hour Sensors are
triggered, alarm system will alert at once.
If user wants to use the entry and exit delay, related sensors
need to be set in entry and exit delay zone. When set is done, after set
delay time, those sensors will make system alert. Refer to Entry and Delay
Setup for details.
In home mode, only normal sensors will be triggered for
alarming while home sensors will not be triggered. This will allow user to
move freely at home.
Press
or
, choose “Test Mode”, press
. LCD display will show
“Yes?”, Press
again to start testing mode.
Please trigger coded sensors in order, the sensors will transmit signals to
control panel. When 3 beeps are heard, LCD display will show the
collected triggering occurences. Then you can count the correctly
connected sensors based on the numbers displayed on the LCD screen.
Exit by pressing
button.
[ ] [ ]
[Enter]
[Enter]
[Esc]
