All the alarm panels are with default user code, admin code and duress
code. Please change all codes before using and keep your codes secret.
Admin Code
1
2
3
4
With admin code, user can arm and disarm, make system settings as well
as reset codes etc.
Log on the menu, press
or
,
.
[ ] [ ]
[Enter]
choose “Syetem Settings”, press
Press
or
, choose “Access Code”, press
.
Press
or
, choose “Admin Code”, press
.
LCD display will show “Input 6 Digits”, then input 6 digits for code, press
.(Default Admin Code: 123456)
Input the new admin code, press
.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[Enter]
[Enter]
5
1
2
3
4
User Code
With user code, user can set arm, home mode and disarm the alarm system.
Log on the menu, press
or
,
.
[ ] [ ]
[Enter]
choose “Syetem Settings”, press
Press
or
, choose “Access Code”, press
.
Press
or
, choose “User Code”, press
.
LCD display will show “Input 4 Digits”, then input 4 digits for code, press
.(Default User Code: 1234)
Input the new user code, press
.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[Enter]
[Enter]
5
1
2
3
4
Duress Code
In case of emergency, when user is violently requested to disarm the system, it's
recommended to use the duress code to disarm the alarm system. The panel will
silently dial stored alarm telephone numbers.
Log on the menu, press
[ ]
or
[ ]
,
choose “System Settings”, press
[Enter]
.
Press
or
, choose “Access Code”, press
.
Press
or
, choose “Duress Code”, press
.
.(Default Duress Code: 1111)
Input the new duress code, press
.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
LCD display will show “Input 4 Digits”, then input 4 digits for code, press
[Enter]
[Enter]
5
3.10 Ringing Times for Remote Phone Control
After the ringing times setting, user can send commands from remote calling,
such as arming/disarming the system.
1
2
Log on the menu, press
or
,
.
[ ] [ ]
[Enter]
choose “System Settings”, press
Press
or
, choose “Ringing Times”, press
.
Input 5~9 for ring times, press
.
Default setting is 5 times.
[ ] [ ]
[Enter]
[Enter]
3
3.11 Alarm Voice
1
2
3
4
5
20
19
3.9 Access Code
1
2
3
4
Record Alarm Voice
Log on the menu, press
or
,
choose “System Settings”, press
.
[ ] [ ]
[Enter]
Press
or
, choose “Alarm Voice”, press
.
Press
or
, choose “Record”, press
.
LCD display will show “Record 10s Voice” to remind you of the 10 seconds
voice recording, press
.
Start voice recording for 10s until the system stops automatically, or press
to stop recording.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[Enter]
[Enter]
Play Recorded Voice
Log on the menu, press
or
,
.
[ ] [ ]
[Enter]
choose “System Settings”, press
Press
or
, choose “Alarm Voice”, press
.
Press
or
, choose “Play”, press
.
The voice record will be played automatically.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
3.12 Siren Setup
Wired Siren
Wired siren is connected to the control panel by wire.
Turn On/Off Wired Siren
Log on the menu, press
or
,
press
.
[ ] [ ]
[Enter]
choose “System Settings”,
Press
or
, choose “Siren Setup”, press
.
Press
or
, choose “Wired Siren”, press
.
Press
or
, choose “Siren Switch”, press
.
Press
or
, choose “On” or “Off”, press
“On” is to turn on the wired siren; “Off” is to turn off the wired siren. Default
setting is “On”; the wired siren is on.
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
[ ] [ ]
[Enter]
1
2
3
4
5
User can leave 10 seconds voice message when control panel makes call to
user's stored phone number, voice record will be repeatedly played to notify
the intrusion.
Users can turn on/off wired siren, wireless siren, built-in siren as well as
arm/disarm beep, and set siren ringing time.
