eTIGER S2, Руководство пользователя

Страница: 13 / 31

24
23
Contact ID Reports
Arm
Disarm
Disarm by RFID tag
PIR detector alarm
Door contact alarm
Emergency call
Duress alarm
Home mode (part arm) Control panel tamper alarm
Sensor tamper alarm
Normal zone alarm
24H zone alarm
Sensor low battery
Control panel low battery
Control panel AC failure
Event Code Event Event Event Code
3401
1401
1409
1132
1131
1100
1120
3456 1137
1144
1140
1133
1384
1302
1301
Precautions
To p revent h a rm to u ser s o r o t h er pe op l e du r ing u s age o f t h e produ c t a nd to
ex tend th e li fe s p an o f t h e p rodu c t, plea s e fo l low t h e p rec au t i on s be low :
General Instruction
The wireless accessories should be connected to the control panel before use.
Low power voltage would affect transmitting distance range.
2 cells of 3.7V/800mAh battery backup or standard power adapter for power supply.
All accessories from our company are compatible with this control panel.
Do not press SOS key if there is no emergency to avoid disturbing neighborhood.
Check the system regularly to ensure the system works properly in case of emergency.
The control panel is neither waterproof nor moisture-proof, please install it in a shady,
cool and dry place.
The case of the control panel is made of ABS. Please keep it away from strong light
for a longer lifespan.
Forbiddance
The control panel is non explosion-proof. Please keep it away from fire, flame sources.
Install the control panel away from objects such as heater, air conditioner, microwave
oven etc. that produces heat or electric-magnetic.
Forbiddance of Decomposition
Take the control panel for disposal of recycling according to the local regulation.
Disassembly for this product can not be done by non-professionals.
Connect to Electronic Lock
Please ignore this if user is not intended to put this alarm as access control. This alarm
only sends on/off signal to electronic door lock, please refer to related electronic door
lock manual for details.
Connect to CMS Center
Please ignore this step if users don't need to connect to CMS center. When connected
to CMS center, control panel will upload contact ID to CMS center automatically once
intrusion is detected.
Add CMS Phone Number
When CMS center phone number is stored, the control panel will auto dial to CMS center
automatically when alarm.
1
2
3
4
Press or , choose “CMS Number1”or “CMS Number2”, press . [ ] [ ] [Enter]
Input CMS phone no, press . If group extension telephone number
is used to connect to the CMS center, please add 0# or9# before the phone
number you plan to store.
Log on the menu, choose “Phone Numbers”, press . [Enter]
Press or , choose “Add Phone Number”, press . [ ] [ ] [Enter]
[Enter]
Note!
If user wants to check or edit the pre-stored phone no., enter “CMS Number
1
~
2” to check or edit.
Delete CMS Phone Number
1
2
3
4
Log on the menu, choose “Phone Numbers”, press .
Press or , choose “Del Phone Number”, press .
Press or , choose in order “CMS Number1~2”, press .
Delete stored CMS phone no., Press .
[Enter]
[ ] [ ] [Enter]
[ ] [ ] [Enter]
[Enter]
1
2
3
User ID
It is supplied by CMS center. After it is stored, CMS center can exactly know user’s
location according to the ID number.
Log on the menu; press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “User ID”, press .
LCD display will show “Input 4 Digits”, input 4 digits user ID, press .
[ ] [ ] [Enter]
[Enter]
Upload Arm/ Disarm Report to CMS Center
1
2
3
When this function is enabled, all arm/disarm reports will be uploaded
automatically to CMS center, so that CMS center can know the status of the alarm
system.
After the User ID is set, press
or to choose “Arm Upload” or
“Disarm Upload”, press .
Press or , Choose “On”, press .
When choosing “Off” during setup , press , arm/ disarm report
will not be uploaded to CMS center.
[ ] [ ]
[Enter]
[ ] [ ] [Enter]
[Enter]
2