Brackets (wall-mounted and
desktop) for control panel x 2
Bracket for PIR Motion
Detector x 2
Double-sided tape for
Door/Window Contact x 2
Screws x 6
User Manual x 1
RFID Tag Reader /
Play Voice Memo
Home Mode (Part Arm)
Disarm
Arm
Voice Memo Button
Status Indicator
LCD Display
Esc
Up/Down
Enter
SOS
Clear
Call
Front Side
Control Panel Layout
4
3
Included Accessories
The control panel is known as the “heart and brain” for
alarm system, which is used for receiving and processing
signals from wireless sensors and remote controls. Users
can make settings freely with the keypad and LCD display.
In case of emergency, the panel hoots on site and dials
the pre-stored alarm phone numbers automatically.
When users pick up the phone, they are able to hear
alarm voice message and choose to monitor on site or
disarm the system.
The wireless PIR Motion Detector is an
intelligent passive infrared motion sensor,
designed to detect human movements
within an approximate range of 6 to 8
meters from the detector. The detector
includes fuzzy logic to minimize false alarms
from unwanted heat sources. With power
saving feature, the detector will enter
sleeping mode after the second activation
within 3 minutes to save power.
S2 Control Panel x1
Wireless PIR Motion Detector x 2
The Door/window contact can be installed
on doors, windows and any other objects
that open and close. The sensor transmits
signals to the control panel when a magnet
mounted near the sensor is moved away.
The RFID tag is for disarming
,
The system
and unlocking the electronic door lock (if
connected).
Supply power to the control panel. In case of power
failure, two built-in backup batteries in the panel will
support 5-hour standby.
The remote control is compact and
portable; it is convenient to carry it to arm,
disarm, part arm the alarm system and also
make an emergency call.
Wireless Remote Control x 2
Wireless Door/Window Contact x 2
Telephone Cable x 1
AC Adapter x 1
RFID Tag x 2
Connect PSTN land line to the control
panel.In case of emergency, the panel
will hoot on site and call the pre-stored
alarm phone number to notify users.
