8
7
Control Panel Operation
1. Alarm Control
Arm (Away Arm)
Home Mode (Part Arm)
Disarm
Emergency Call
Hold the
button for 3 seconds when the LCD
display is activated, the system goes into emergent
alarming state with siren hooting, meanwhile the
Panel will auto dial pre-stored alarm phone numbers.
[ ]
Input user code or admin code first, then press
the
button, the system enters Disarm
state when one beep is heard and the Disarm LED
Indicator lights on.
[Disarm ]
Press the
button on the
control panel, the system enters Home Mode when
one beep is heard and the Home Mode LED
Indicator lights on. All the Normal Sensors are
armed except the Home Mode Sensors which
are disarmed so that users can move freely at home.
[Home Mode ]
Press the
button on the control panel,
the system enters Arm state when one beep is
heard and the Arm LED Indicator lights on.
[Arm ]
If Entry/Exit Delay is activated, all zones except the
24-hour zone will enter Arm state after the set delay
time.The Delay Sensors will enter Arm state after the
set delay time.
Note!
2. Access Control System
3. Dialing Calls
The control panel has a built-in call module. Make sure the PSTN land line
is connected and the credit is enough, you can use the panel to make calls.
When the control panel is in Disarm or Home Mode state, input the phone
number and press
button, the line will get through. If you input
wrong numbers, press
button and input again. Press
button to
cancel dialing or press
button to end a conversation.
[Call ]
[Esc]
[Esc]
[Call
]
4. Voice Memo
5. Function Setting
Input the admin code, and then press
to enter setting menu.
Up
Confirm
Down
p
e
t
s
t
s
a
l
o
t
k
c
a
B
[Enter]
Enter
Esc
The control panel has a RFID reader for unlocking the electronic door lock
by disarming the system. Just place the RFID tag close to the RFID reader,
the green LED indicator flashes once.
The system is disarmed and the electronic door lock is open (If
connected).
Hold 3 seconds
button to record 10 seconds voice message. The
Play Voice Memo circle will be flashing in blue to notify you. Users can
touch the center of circle to listen to the voice memo. The LED indicator
blacks out when the voice memo has been played. Replay by touching it
again.
[ ]
