Eternal GU125T, Инструкция по установке и эксплуатации

Страница: 31 / 39

31
How To Use The Front Control Interface
Water Temperature Time to Produce a Serious Burn
120 ° F More than 5 minutes
125 ° F 1.5 to 2 minutes
130 ° F About 30 seconds
135 ° F About 10 seconds
140 ° F Less than 5 seconds
145 ° F Less than 3 seconds
150 ° F About 1.5 seconds
155 ° F About 1 seconds
□
Hot water heater temperature over 125 ° F can cause severe burns instantly or death from scalding.
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available; please ask a certi
 ed professional.
□
□
□
DANGER
! !
Per some state codes – water temperature should not be set higher than 120 ° F. Please check with your local
codes to ensure temperature is set properly.
□
CAUTION
! !
BURN
□
□
1. To switch the water heater ON from OFF condition, press the Power Button, then ETERNAL WATER will be
displayed on LCD Monitor.
NORMAL, HOTTER and HIGH OUTPUT will display on the LCD monitor. This indicates the water heater is
stored hot water selection.
2. When tank water temperature is lower than setting temperature, the water heater will start the burner
automatically and LCD monitor will show the IN USE display.
3. To switch the water heater OFF Press the Power Button.
The temperature selected on the LCD monitor doesn't control the output temperature of the water heater,
it only controls the stored hot and temperature of the tank.
4. To adjust hot water output temperature please see page 30.