Eternal GU125T, Инструкция по установке и эксплуатации

Страница: 26 / 39

26
LP Conversion
How to convert to LP
1. Remove top service panel by loosening 5 screws.
2. Locate the gas valve towards lower left of the unit.
3. Loosen the two nuts connecting the gas tube to
gas valve.
4. Insert LP orifice into the nozzle, retighten gas tube
and make sure no gas leaks.
Adjust the propane supply regulator provided by the gas supplier for 13" w.c. maximum pressure.
□
Contact the local propane gas supplier for recommended sizing of piping, tanks and 100% lockup gas regulator.
NOTICE
! !
5.
Prior to start up, ensure the unit is set to  re propane.
Check the rating label for the type of fuel. If there is a
con
 ict or doubt on the setup, remove the gas valve
and check for the propane ori  ce. Failure to ensure
proper setup could result in severe personal injury,
death or substantial property damage.
WARNING
! !
LP Conversion kit is included in the accessory box. Conversion can only be completed by a qualified professional.
NOTICE
! !
Reassemble the top service panel and apply the LP
label which is in the accessory kit.
Nut
LP Label
Gas Valve
LP Ori  ce
Gas Tube