ETC Echo-Echoflex Interface Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 15

background image

ETC Installation Guide

Echo-Echoflex Interface

Echo-Echoflex Interface

Page 5 of 15

ETC

Learn/Teach

The [LEARN/TEACH] button links Echoflex wireless devices to the EEI.

• When a wireless input is selected, pressing the [LEARN/TEACH] button “Learns” Echoflex devices that

are in “Teach” mode to the wireless input.

• When a wireless output is selected, pressing the [LEARN/TEACH] button “Teaches” the wireless

output to Echoflex Controllers that are in “Learn” mode.

Clear

The [CLEAR] button clears (unlinks) linked Echoflex devices from the selected Echoflex Input or Echoflex
Output. See

Clearing the Linked Devices from Wireless Inputs and Outputs on page 10

.

Program Mode

Program Mode allows the configuration of which Echo Presets is assigned to the selected Echoflex Input
and which Echo Zone is assigned to the selected Echoflex Output. See

Program Mode on page 11

.

Record

Used with the selected wireless input, Record allows the corresponding Echo Preset to be snapshot
recorded. See

Record on page 10

LEDs

Input Status

The INPUT STATUS LED displays the state of the currently selected wireless input.

When an Echoflex device is linked to the Echoflex Input and the Echoflex Input is selected, the LED reflects
the current control status of the linked device. Generally speaking “lights on” events are shown with a
green LED, “lights off” events are shown with a red LED, and amber is shown for intermediate states.

Echoflex wireless Switch Station

- Green - Switch is pressed in On Position.
- Amber - Switch is at rest.
- Red - Switch is pressed in Off position.

Occupancy Sensor

- Green - Occupied
- Red - Vacant

Photo Sensor - Dimmed Operation

- Green - as light levels are raising
- Amber - light levels are within the set thresholds
- Red - as light levels are lowering

Photo Sensor - Switched Operation

- Green - sensor is in Dark state (lights on)
- Amber - sensor is between thresholds
- Red - sensor is in Bright state (lights off)

Note:

Reference the related Echoflex device installation guide, available as a download from the

etcconnect.com

for information about placing your Echoflex wireless

devices in Learn or Teach mode.

«
...
3
4
5
6
7
...
»

Содержание Echo-Echoflex Interface
















Отзывы:

Нет отзывов

Похожие инструкции для Echo-Echoflex Interface

Бренд: Baker Hughes Страницы: 168

Бренд: Cadman Страницы: 66

Бренд: Parr Instrument Страницы: 24

Бренд: JBL Страницы: 15

Бренд: Daktronics Страницы: 30

Бренд: DAKOTA ULTRASONICS Страницы: 28

Бренд: KaVo Страницы: 49

Бренд: Easson Страницы: 33

Бренд: Gatekeeper Страницы: 8

Bure Rise & Go DB 56-309

Бренд: Gate Страницы: 8

Бренд: HANYOUNG NUX Страницы: 2

Ti-Max NLX nano

Бренд: NSK Страницы: 38

Бренд: Sensio Страницы: 3

FUSION Equine DR II

Бренд: SOUND Страницы: 178

Бренд: TECshow Страницы: 22

TEMSTM POCKET 7.3

Бренд: ASCOM Страницы: 8

Бренд: Chamberlain Страницы: 8

Бренд: LINET Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды