ENGLISH
17
In case the operator should want to select Measurement Type also during operations, proceed as follows:
BASIC menu > SETTINGS > EXPERT MENU > MENU SELECTION > SETPOINT1 > Measurement Type
a
from EXPERT menu go into > M E N U S E L E C T I O N > S E T P O I N T 1 > M e a s u r e m e n t T y p e
a
Press E S C to go back to M E N U S E L E C T I O N or press E S C
E S C to go back to M E A S U R E M E N T D I S P L A Y
A
TEMPERATURE settings
One of the following functional modes can be selected:
Manual:
The value is set by the user (0-100°C) in the configuration menu, it is the
reference parameter for offsetting the pH value
Automatic:
The value measured by the PT100 probe is the reference parameter for
offsetting the pH value
DATE AND TIME – Timer in real time
◄
►◄
►
Some applications might require programming activation or
deactivation of the device. This is why the electronic device is
equipped with a clock and calendar;
PROGRAMMING MENU
The eSelect M PH(RX) instrument lets you choose between:
BASE programming: only the basic functions are available (for the user).
EXPERT programming: complete programming that includes functions for more accurate control and results (for the installer).
After selecting the type of programming, the Menus and sub-menus will change accordingly.
To help the operator choose the correct menu, the main differences between the two are set out below:
Setpoint 1-2 <
Setpoint value - Metering - ON/OFF or Proportional mode - Alarm
MIN/MAX (only on Setpoint1)
> Calibration > Settings >
Setpoint 1 -2 <
Setpoint value - Metering - ON/OFF or Proportional mode - Hysteresis - Setpoint
delay - T emp. correction - MIN/MAX Alarm (only on Setpoint1) - Overdose - Max Dosage – Start-u p
delay
> 4-20mA1 > 4-20mA2 > Calibration > Start/S top > Aux Output > Settings >
Press O K / M E N U the display shows BASIC menu (default)
BASIC PROGRAMMING MENU
These are all the steps included in the MENU SELECTION menu configuration with BASIC programming:
◄
►
◄
►
* When M e a s u r e m e n t T y p e RX,
S
S E T P O I N T 1 , S E T P O I N T 2 and
C
C A L I B R A T I O N are selected, RX (mV)
values will be read
SETTINGS
Temp. Sensor
Automatic
SETTINGS
Temperature
25°C
SETTINGS
Temp. Sensor
Manual
Date
2017 May 14
Time
12:02
Menu Mode
BASIC
Menu Mode
EXPERT
Menu Selection
Setpoint 1(pH)*
Menu Selection
Setpoint 2 (pH)*
