eta Fresh water module 33, Руководство по эксплуатации

Страница: 24 / 44

24 www.eta.co.at
Circuit board EM-C4 Electrical connections
6.3 Circuit board EM-C4
Terminals marked with the symbol are not factory pre-wired.
Terminal Function Default assignment
CAN Node CAN-Bus node switch
Position "7" for fresh water module "33"
Position "9" for fresh water module "44"
F1 Fuse T 3,15 A (Mains power input)
S100 Supply 230 V Mains power input
S101 230 V output Buffer pump and admixing pump
S102 LA 230 V output Circulation pump (optional)
S102 LZ 230 V output
Motor ball valve for cascade systems (if there are
several fresh water modules)
From factory, this output is intended for motor ball
valves of cascade systems in order to activate
the subsequent fresh water module (also referred to
as "Slave" module).
This output can also be used for a solenoid valve in
order to turn off the heater side of the fresh water
module in case this is not connected hydraulically
decoupled. See chapter
3.4 "Information for installa-
tion" .
S103 230 V input
On the factory side, the contacts "NC" and
"COM" are connected (bridged), because
otherwise all 230 V outputs are locked.
S600 T1 Temperature input Primary flow
S600 T2 Temperature input Primary return
S600 T3 Temperature input Free (can be used for buffer)
S600 T4 Temperature input Free (can be used for buffer)
S600 T5 Temperature input Potentiometer for the hot water temperature
S600 T6 Temperature input Hot water