eta Fresh water module 33, Руководство по эксплуатации

Страница: 14 / 44

14 www.eta.co.at
Select installation site Installation
4.2 Select installation site
Mounting the fresh water module on the wall
The position for two screws on the top and bottom side
each must be transferred to the wall. Mount the
four screws in the wall, hang the fresh water module
on these and fasten in place.
Fig. 4-3: Mounting holes for wall installation
The fresh water module weighs approximately
20 kg.
Mounting the fresh water module on the buffer
For mounting the fresh water module on the buffer, a
bracket with clamping jaws for 6/4" nipples is optionally
available.
Fig. 4-4: optional bracket with clamping jaws
Reseal the 6/4" nipple and mount in a buffer
connection that is not in use. Mount the clamping jaws
at the required height in the bracket. Push the bracket
with the clamping jaws onto the nipple and fasten
using the two screws.
Fig. 4-5: Bracket with clamping jaws