Essilor PRO-E 600 Скачать руководство пользователя страница 8

Страница: 8 / 112

2. U

SING

THE

EDGER

In this section, you will find all the information concerning the following:

•

Turning on

(

p.10)

andoff

(

p.10)

the edger,

•

the use of the touch screen and the keyboards

(

p.11)

•

the description of the work screens of the edger

(

p.12)

a. Turning on the edger

Press the main switch, located behind the edger on the left, to power it up.

Press the ON/OFF button

located under the touch screen.

The edger will initialise.

On the edger screen, press on the “cycle start” button on the front surface or on the

icon to end the

initialization phase.

A beep indicates that the initialisation was successful.

The edger is ready for use when the initial screen is displayed.

b. Switching off the edger

Before switching off the edger:

•

Check that there is no glass in the trough

•

Check that the lens clamp shafts are loosened and that the trough door is open

•

Select the edging screen

Briefly press the ON/OFF button

located under the touch screen or press

, then

Do not press the ON/OFF button for several seconds. This would result in a shut-down of the

machine and a warningmessage would be displayed at the next switch-on.

A confirmation message is displayed on the screen.

Press

to confirm.

The edger will switch off.

Pro-E 600 > v1 -02.17

SER

ANUAL

> I. F

IRST

STEPS

WITH

-E 600

Содержание PRO-E 600

















































































































Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды

Essilor PRO-E 600, Руководство пользователя

Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды