Essilor PRO-E 600 Скачать руководство пользователя страница 49

Страница: 49 / 112

ROOVE

RAME

ENS

DVANTAGES

Standard groove

Lens for which the front

surface base is approximately

equal to the frame base.

Makes it possible to do an aesthetically

pleasing job. The lens material does not

protrude beyond the front of the frame.

Standard groove

Lens for which the rear

surface base is not as high as

the front surface base.

Minimises the risks of the nylon thread

coming out.

Standard groove

Thin lens

Makes it possible to balance out the groove

when thin lenses are used.

Flat base

High base

Thin lens for which the front

surface base is approximately

equal to the frame base.

In the event of pattern tracing (base = 0),

makes it possible to retrieve the frame base.

Call up the desired shape located on the tracer or on the job management program.

The shape is displayed on the edger work screen.

After tracing a pattern, demo lens or recut lens, without any drilling settings:

•

the groove finish is selected by default.

•

the automatic mode is selected by default.

Select lens material.

Change the edging mode. Press

to select customized mode

Select the type of cycle.

Choose whether or not to polish and/or chamfer your lens.

For more information, consult the section Edging a lens > Perform a polishing

(

p.65)

and Edging a

lens > Perform a chamfering

(

p.66)

Press the “cycle start” button (front face) or

The door closes, the lens is clamped and then felt.

The customized groove finish screen is displayed.

Select the type of customized groove you want to do.

Pro-E 600 > v1 -02.17

SER

ANUAL

> II. E

DGING

LENS

Содержание PRO-E 600

















































































































Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды

Essilor PRO-E 600, Руководство пользователя

Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды